Reference Guide

1008 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
Defaults
Both transmit and receive
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
Related
Commands
multiplier
c e s
Set the number of consecutive misses before LLDP declares the interface dead.
Syntax multiplier integer
To return to the default, use the no multiplier integer command.
Parameters
Defaults
4 x hello
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
protocol lldp (Configuration)
c e s
Enable LLDP globally on the switch.
Version 8.3.19.0. Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
protocol lldp
(Configuration)
Enable LLDP globally.
show lldp neighbors Display the LLDP neighbors
integer
Enter the number of consecutive misses before the LLDP declares the interface dead.
Range: 2 - 10
Version 8.3.19.0. Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series