Reference Guide

1010 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
Syntax
show lldp neighbors
[interface] [detail]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Example
R1(conf-if-gi-1/31)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
-------------------------------------------------------------------------
Gi 1/21 R2 GigabitEthernet 2/11 00:01:e8:06:95:3e
Gi 1/31 R3 GigabitEthernet 3/11 00:01:e8:09:c2:4a
Usage
Information
Omitting the keyword detail displays only the remote chassis ID, Port ID, and Dead
Interval.
show lldp statistics
c e s
Display the LLDP statistical information.
Syntax show lldp statistics
Defaults
No default values or behavior
Command Modes
EXEC Privilege
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
detail
(OPTIONAL) Enter the keyword detail to display all the TLV information,
timers, and LLDP tx and rx counters.
Version 8.3.19.0. Introduced on S4820T
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series