Reference Guide

1028 | Multicast Source Discovery Protocol (MSDP)
www.dell.com | support.dell.com
ip msdp redistribute
e
Filter local PIM SA entries in the SA cache. SAs which are denied by the ACL will
time out and not be refreshed. Until they time out, they will continue to reside in the
MSDP SA cache.
Syntax
ip msdp redistribute
[list acl-name]
Parameters
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
Usage
Information
Modifications to the ACL will not have an immediate affect on the sa-cache.
To apply the redistribute filter to entries already present in the SA cache, use
clear ip
msdp sa-cache local
.
ip msdp sa-filter
e
Permit or deny MSDP source active (SA) messages based on multicast source and/or
group from the specified peer.
Syntax
ip msdp sa-filter
{in | out} peer-address list [access-list name]
Remove this configuration using the command
no ip msdp sa-filter {in | out} peer
address list
[access-list name]
Parameters
Defaults
Not configured
Command Modes
CONFIGURATION
list acl-name
Enter the name of an extended ACL that contains permitted SAs. If you do not
use this option, all local entries are blocked.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced
in
Enter the keyword in to enable incoming SA filtering.
out
Enter the keyword out to enable outgoing SA filtering.
peer-address
Enter the peer address of the MSDP peer in a dotted decimal format
(A.B.C.D.)
access-list name
(OPTIONAL) Enter the IP extended access list name that defines
from which peers SAs are to be permitted or denied.