Reference Guide

1030 | Multicast Source Discovery Protocol (MSDP)
www.dell.com | support.dell.com
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
ip multicast-msdp
e
Enable MSDP.
Syntax ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
show ip msdp
e
Display the MSDP peer status, SA cache, or peer summary.
Syntax
show ip msdp
{peer peer address | sa-cache | summary}
Parameters
Defaults
Not configured
Command Modes
EXEC
EXEC Privilege
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 6.2.1.1 Introduced
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 6.2.1.1 Introduced
peer peer address
Enter the keyword peer followed by the peer address in a dotted decimal
format (A.B.C.D.)
sa-cache
Enter the keyword sa-cache to display the Source-Active cache.
summary
Enter the keyword summary to display a MSDP peer summary.