Reference Guide

Multiple Spanning Tree Protocol (MSTP) | 1045
spanning-tree
c e s
Enable Multiple Spanning Tree Protocol on the interface.
Syntax
spanning-tree
To disable the Multiple Spanning Tree Protocol on the interface, use no spanning-tree
Parameters
Defaults
Enable
Command Modes
INTERFACE
Command
History
spanning-tree msti
c e s
Configure Multiple Spanning Tree instance cost and priority for an interface.
Syntax
spanning-tree msti instance {cost cost | priority priority}
Table 34-1. show spanning-tree msti guard Command Information
Field Description
Interface Name MSTP interface
Instance MSTP instance
Sts Port state: root-inconsistent (INCON Root), forwarding (FWD), listening
(LIS), blocking (BLK), or shut down (EDS Shut)
Guard Type Type of STP guard configured (Root, Loop, or BPDU guard)
spanning-tree
Enter the keyword spanning-tree to enable the MSTP on the interface.
Default: Enable
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Added support for S-Series
Version 7.5.1.0 Added support for C-Series
pre-Version 6.2.1.0 Introduced on E-Series