Reference Guide

Multicast | 1057
Command Modes
EXEC
EXEC Privilege
Command
History
Example
(show ip mroute
static)
FTOS#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change: 00:00:23
Example
(show ip mroute
snooping)
FTOS#show ip mroute snooping
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
(*, 225.1.2.1), uptime 00:04:16
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Incoming vlan: Vlan 2
Outgoing interface list:
active [rate] (OPTIONAL) Enter the keyword active to view only active multicast
routes. Enter a rate to view active routes over the specified rate.
Range: 0 to 10000000
count
(OPTIONAL) Enter the keyword count to view the number of multicast
routes and packets on the E-Series.
snooping
[vlan
vlan-id]
[group-address
[source-address]]
(OPTIONAL) E-Series ExaScale, S4810, and S4820T only:
Enter the keyword
snooping to display information on the multicast
routes discovered by PIM-SM snooping.
Enter a VLAN ID to limit the information displayed to the multicast
routes discovered by PIM-SM snooping on a specified VLAN. Valid
VLAN IDs: 1 to 4094.
Enter a multicast group address and, optionally, a source multicast
address in dotted decimal format (A.B.C.D) to limit the information
displayed to the multicast routes discovered by PIM-SM snooping for a
specified multicast group and source.
summary
(OPTIONAL) Enter the keyword summary to view routes in a tabular
format.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.1.1 Support for the snooping keyword and optional vlan vlan-id
, group-address,
and source-address parameters were added on E-Series ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series legacy command