Reference Guide

1090 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
* BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
History
Usage
Information
The distribute-list out command applies to routes being redistributed by autonomous
system boundary routers (ASBRs) into OSPF. It can be applied to external type 2 and
external type 1 routes, but not to intra-area and inter-area routes.
enable inverse mask
c e
FTOS, by default, permits the user to input OSPF network command with a
net-mask. This command provides a choice between inverse-mask or net-mask (the
default).
Syntax
enable inverse mask
To return to the default net-mask, enter no enable inverse mask.
Defaults
net-mask
Command Modes
CONFIGURATION
Command
History
fast-convergence
c e s
This command sets the minimum LSA origination and arrival times to zero (0),
allowing more rapid route computation so that convergence takes less time.
rip (OPTIONAL) Enter the keyword rip to specify that RIP routes are
distributed.*
static
(OPTIONAL) Enter the keyword static to specify that only manually
configured routes are distributed.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series