Reference Guide

112 | Control and Monitoring
www.dell.com | support.dell.com
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Usage
If there are no fiber ports in the unit, then just the header under show inventory media
will be displayed. If there are fiber ports but no optics inserted, then the output will
display “Media not present or accessible”.
Example
(show inventory)
FTOS #show inventory
System Type : S4810
System Mode : 1.0
Software Version : E8-3-12-2
Unit Type Serial Number Part Number Rev Piece Part ID Rev Svc Tag Exprs Svc Code
------------------------------------------------------------------------------- ------------------------------
* 2 S4810-01-64F HADL123J20113 7590009602 A N/A N/A N/A N/A
2 S4810-PWR-AC H6DL123J20113 7590008502 A N/A N/A N/A N/A
2 S4810-FAN N/A N/A N/A N/A N/A N/A N/A
2 S4810-FAN N/A N/A N/A N/A N/A N/A N/A
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
FTOS#
Example
(show inventory
media)
FTOS #show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------------------------------
2 0 UNKNOWN UNKNOWN ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ No
2 1 SFP+ 10GBASE-CU1M DM63910000000008 Yes
2 2 SFP 1000BASE-SX PLE71M5 Yes
2 3 SFP 1000BASE-SX U9E00M1 Yes
2 4 Media not present or accessible
2 5 Media not present or accessible
2 6 Media not present or accessible
2 7 Media not present or accessible
2 8 Media not present or accessible
2 9 Media not present or accessible
2 10 Media not present or accessible
2 11 Media not present or accessible
2 12 SFP+ 10GBASE-CU1M APF11030021261 Yes
2 13 SFP+ 10GBASE-CU1M APF11030021230 Yes
2 14 SFP+ 10GBASE-CU3M 129830840 No
2 15 SFP+ 10GBASE-CU3M TED1417B065 No
2 16 Media not present or accessible
2 17 Media not present or accessible
FTOS #
media slot (OPTIONAL) Enter the keyword media followed by the stack ID of the stack
member for which you want to display pluggable media inventory.
Version 7.6.1.0 Introduced this version of the command for S-Series. S-Series output differs
from E-Series.