Reference Guide

1124 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
Related
Commands
show ip ospf database summary
c e s
Display the network summary (type 3) LSA routing information.
Syntax
show ip ospf process-id database summary [link-state-id] [adv-router ip-address]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip ospf 100 database summary
OSPF Router with ID (1.1.1.10) (Process ID 100)
Number of Links Displays the number of active links to the type of router (Area Border
Router or AS Boundary Router) listed in the previous line.
Link connected to: Identifies the type of network to which the router is connected.
(Link ID) Identifies the link type and address.
(Link Data) Identifies the router interface address.
Number of TOS Metric Lists the number of TOS metrics.
TOS 0 Metric Lists the number of TOS 0 metrics.
Table 37-8. Command Example Descriptions:
show ip ospf process-id database
router
Item Description
show ip ospf database Displays OSPF database information.
process-id Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value
depends on the LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-address
(OPTIONAL) Enter the keywords
adv-router ip-address to display only the
LSA information about that router.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series