Reference Guide

1126 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
Related
Commands
show ip ospf interface
c e s
Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no
output is generated.
Syntax
show ip ospf process-id interface [interface]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Network Mask Displays the network mask implemented on the area.
TOS Displays the TOS options. Option 0 is the only option.
Metric Displays the LSA metrics.
Table 37-9. Command Example Descriptions:
show ip ospf process-id database
summary
Items Description
show ip ospf database Displays OSPF database information.
process-id Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For the null interface, enter the keyword
null followed by zero (0).
• For loopback interfaces, enter the keyword
loopback followed by a number
from 0 to 16383.
• For Port Channel groups, enter the keyword
port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1-32 for EtherScale, 1-255 for TeraScale
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by the VLAN ID. The range is
from 1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced process-id option, in support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series