Reference Guide

Open Shortest Path First (OSPFv2) | 1133
Related
Commands
show ip ospf timers rate-limit
Show the LSA currently in the queue waiting for timers to expire.
Syntax
show ip ospf process-id timers rate-limit
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip ospf 10 timers rate-limit
List of LSAs in rate limit Queue
LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time: 00:00:09.111
LSA id: 3.3.3.3 Type: 1 Adv Rtid: 3.3.3.3 Expiry time: 00:00:23.96
FTOS#
show ip ospf topology
c e s
Display routers in directly connected areas.
Syntax
show ip ospf process-id topology
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
clear ip ospf statistics Clear the packet statistics in all interfaces and neighbors
process-id Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF
process.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.8.0 Introduced on S4810
process-id Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF
process.