Reference Guide

PIM-Sparse Mode (PIM-SM) | 1141
Command
History
clear ip pim snooping tib
c e s
Clear tree information discovered by PIM-SM snooping from the PIM database.
Syntax
clear ip pim snooping
tib [vlan vlan-id] [group-address]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
debug ip pim
c e s
View IP PIM debugging messages.
Syntax
debug ip pim
[bsr | events | group | packet [in | out] | register | state | timer [assert | hello |
joinprune | register]]
To disable PIM debugging, enter
no debug ip pim, or enter undebug all to disable all
debugging.
Parameters
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
vlan vlan-id (OPTIONAL) Enter a VLAN ID to clear TIB information learned through
PIM-SM snooping about a specified VLAN. Valid VLAN IDs: 1 to 4094.
group-address (OPTIONAL) Enter a multicast group address in dotted decimal format
(A.B.C.D) to clear TIB information learned through PIM-SM snooping
about a specified multicast group.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.1.1 Introduced on E-Series ExaScale
Version 8.3.7.0 Introduced on S4810
show ip pim snooping tib Display TIB information learned through PIM-SM snooping.
bsr
(OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR
activities.
events
(OPTIONAL) Enter the keyword events to view PIM events.