Reference Guide

1142 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Defaults
Disabled
Command Modes
EXEC Privilege
Command
History
ip pim bsr-border
c e s
Define the border of PIM domain by filtering inbound and outbound PIM-BSR
messages per interface.
Syntax ip pim bsr-border
To return to the default value, enter no ip pim bsr-border.
Defaults
Disabled
Command Modes
INTERFACE
Command
History
group
(OPTIONAL) Enter the keyword group to view PIM messages for a
specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one
of the optional parameters
• in: to view incoming packets
• out: to view outgoing packets.
register
(OPTIONAL) Enter the keyword register to view PIM register address
in dotted decimal format (A.B.C.D).
state
(OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert | hello |
joinprune | register]
(OPTIONAL) Enter the keyword
timer to view PIM timers. Enter one of
the optional parameters:
• assert: to view the assertion timer.
• hello: to view the PIM neighbor keepalive timer.
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on C-Series on port-channels and S-Series.