Reference Guide

Control and Monitoring | 115
Related
Commands
show linecard boot-information
e
View the line card status and boot information.
Syntax
show linecard boot-information
Command Modes
EXEC
EXEC Privilege
Num Ports Displays the number of ports in the line card.
Up Time Displays the number of hours and minutes the card is online.
FTOS Version Displays the operating software version.
Jumbo Capable Displays Yes or No indicating if the line card can support Jumbo
frames. This field does not state whether the chassis is operating in
EtherScale or TeraScale mode.
Boot Flash Ver Displays the two possible Bootflash versions. The [Booted]
keyword next to the version states which version was used at
system boot.
Memory Size List the memory of the line card processor.
Temperature Displays the temperature of the line card.
Minor alarm status if temperature is over 65° C.
Power Status Lists the type of power modules used in the chassis:
• AC = AC power supply
• DC = DC Power Entry Module (PEM)
Voltage Displays OK if the line voltage is within range.
Serial Number Displays the line card serial number.
Part Num Displays the line card part number.
Vendor ID Displays an internal code, which specifies the manufacturing
vendor.
Date Code Displays the line card’s manufacturing date.
Table 4-1. Descriptions for
show linecard output
Field Description
linecard Pre-configure a line card in a currently empty slot of the system or a different
line card type for the slot.
show interfaces
linecard
Display information on all interfaces on a specific line card.
show chassis View information on all elements of the system.
show rpm View information on the RPM.
show sfm View information on the SFM.