Reference Guide

1158 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Command
History
Example
FTOS#show ip pim snooping neighbor
Neighbor Interface Uptime/Expires Ver DR Prio
Address
165.87.32.2 Vl 2 [Gi 4/13 ] 00:04:03/00:01:42 v2 1
165.87.32.10 Vl 2 [Gi 4/11 ] 00:00:46/00:01:29 v2 0
165.87.32.12 Vl 2 [Gi 4/20 ] 00:00:51/00:01:24 v2 0
show ip pim snooping tib
e
x
Display information from the tree information base (TIB) discovered by PIM-SM
snooping about multicast group members and states.
Syntax
show ip pim snooping tib
[vlan vlan-id] [group-address [source-address]]
Parameters
Command Modes
EXEC
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.1 Introduced on E-Series ExaScale
Table 38-4. show ip pim snooping neighbor Command Example Fields
Field Description
Neighbor address Displays the IP address of the neighbor learned through PIM-SM
snooping.
Interface Displays the VLAN ID number and slot/port on which the
PIM-SM-enabled neighbor was discovered.
Uptime/expires Displays the amount of time the neighbor has been up followed by
the amount of time until the neighbor is removed from the multicast
routing table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority)
• DR = Designated Router
•S = Sparse mode
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information discovered by
PIM-SM snooping on a specified VLAN. Valid VLAN IDs: 1 to 4094.
group-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to
display TIB information discovered by PIM-SM snooping for a specified
multicast group.
source-address (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to
display TIB information discovered by PIM-SM snooping for a specified
multicast source.