Reference Guide

PIM-Sparse Mode (PIM-SM) | 1163

show running-config pim

Display the current configuration of PIM-SM snooping.

Syntax

show running-config pim

Command Modes

EXEC Privilege

Command

History

Commands

Example

FTOS#show running-config pim

ip pim snooping enable

IPv6 PIM-Sparse Mode Commands

The IPv6 PIM-SM commands are:

• ipv6 pim bsr-border

• ipv6 pim bsr-candidate

• ipv6 pim dr-priority

• ipv6 pim join-filter

• ipv6 pim query-interval

• ipv6 pim neighbor-filter

• ipv6 pim register-filter

• ipv6 pim rp-address

Incoming interface Displays the reverse path forwarding (RPF) interface towards the

RP/source.

RPF neighbor Displays the next hop from this interface towards the RP/source.

Outgoing interface list: Lists the interfaces that meet one of the following criteria:

• a directly connect member of the Group.

• statically configured member of the Group.

• received a (*,G) Join message.

Table 38-6. show ip pim tib Command Example Fields (continued)

Field Description

Version 8.3.19.0 Introduced on S4820T

Version 8.3.12.0 Introduced on the S4810.

Version 8.4.1.0 Introduced on E-Series ExaScale.

ip pim snooping Enable PIM-SM snooping.