Reference Guide

1164 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
• ipv6 pim rp-candidate
• ip pim sparse-mode
• ipv6 pim spt-threshold
• show ipv6 pim bsr-router
• show ipv6 pim interface
• show ipv6 pim neighbor
• show ipv6 pim rp
• show ipv6 pim tib
clear ipv6 pim tib
e
Clear the IPv6 PIM multicast-routing database (tree information base—tib).
Syntax
clear ipv6 pim tib [group-address]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Related
Commands
debug ipv6 pim
e
Invoke IPv6 PIM debugging.
Syntax
debug ipv6 pim [bsr | events | group group | packet | register [group] | state | | timer
[
assert | hello | joinprune | register]]
To disable IPv6 PIM debugging, enter
no debug ipv6 pim.
Parameters
group-address
(OPTIONAL) Enter the multicast group address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zero.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 7.4.1.0 Introduced
show ipv6 pim tib Display the IPv6 PIM tree information base (tib)
bsr
(OPTIONAL) Enter the keyword bsr to invoke debugging of IPv6 PIM
Candidate RP/BSR activities.
events
(OPTIONAL) Enter the keyword events to invoke debugging of IPv6
PIM events.