Reference Guide

PIM-Sparse Mode (PIM-SM) | 1165
Defaults
Disabled
Command Modes
EXEC Privilege
Command
History
ipv6 pim bsr-border
e
Define the border of PIM domain by filtering inbound and outbound PIM-BSR
messages per interface.
Syntax
ipv6 pim bsr-border
Defaults
Disabled
Command Modes
INTERFACE
Command
History
Usage
Information
This command is applied to the subsequent PIM-BSR messages. Existing BSR
advertisements are cleaned up by time-out.
ipv6 pim bsr-candidate
e
Configure the router as a bootstrap (bsr) candidate.
group group (OPTIONAL) Enter the keyword group followed by the group address
to invoke debugging on that specific group.
packet
(OPTIONAL) Enter the keyword packet to invoke debugging of IPv6
PIM packets.
register [group]
(OPTIONAL) Enter the keyword register and optionally the group
address to invoke debugging of IPv6 PIM register messages for a
particular group.
state
(OPTIONAL) Enter the keyword state to view IPv6 PIM state changes.
timer [assert | hello |
joinprune | register]
(OPTIONAL) Enter the keyword
timer to view IPv6 PIM timers. Enter
one of the optional parameters:
• assert: to view the assertion timer.
• hello: to view the IPv6 PIM neighbor keepalive timer.
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 7.4.1.0 Introduced
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.1.0 Introduced