Reference Guide

1168 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
ipv6 pim neighbor-filter
e
Prevent the system from forming a PIM adjacency with a neighboring system.
Syntax
ipv6 pim neighbor-filter {access-list}
Parameters
Defaults
None
Command Modes
CONFIGURATION
Command
History
Usage
Information
Do not enter this command before creating the access-list.
ipv6 pim register-filter
e
Configure the source DR so that it does not send register packets to the RP for the
specified sources and groups.
Syntax
ipv6 pim register-filter access-list
Parameters
Defaults
None
seconds Enter a number as the number of seconds between router query messages.
Default: 30 seconds
Range: 0 to 65535
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 7.4.1.0 Introduced
access-list
Enter the name of a standard access list. Maximum 16 characters.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.1.0 Introduced
access-list
Enter the name of the extended ACL that contains the sources and groups
to be filtered.