Reference Guide

Control and Monitoring | 117
Related
Commands
show memory (C-Series and E-Series)
c e
View current memory usage on the system.
Syntax
show memory [cp | lp slot-number | rp1 | rp2]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for show memory displays the memory usage of LP part (sysdlp) of the
system. The Sysdlp is an aggregate task that handles all the tasks running on
C-Series’ and E-Series' LP.
In FTOS Release 7.4.1.0 and higher, the total counter size (for all 3 CPUs) in show
memory (C-Series and E-Series) and show processes memory (C-Series and
E-Series) will differ based on which FTOS processes are counted.
•In the show memory (C-Series and E-Series) display output, the memory size is
equal to the size of the application processes.
•In the show processes memory (C-Series and E-Series) display output, the
memory size is equal to the size of the application processes plus the size of the
system processes.
show linecard View the line card status
upgrade (E-Series version) Upgrade the boot flash, boot selector, or system image
download alt-boot-image Download an alternate boot image to the chassis
download alt-full-image Download an alternate FTOS image to the chassis
download alt-system-image Download an alternate system image to the chassis
cp
(OPTIONAL) Enter the keyword cp to view information on the Control
Processor on the RPM.
lp slot-number (OPTIONAL) Enter the keyword lp and the slot number to view information
on the line-card processor in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to
5 on a E300.
rp1
(OPTIONAL) Enter the keyword rp1 to view information on Route
Processor 1 on the RPM.
Note: This option is supported on the E-Series only.
rp2
(OPTIONAL) Enter the keyword rp2 to view information on Route Processor
2 on the RPM.
Note: This option is supported on the E-Series only.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command