Reference Guide

118 | Control and Monitoring
www.dell.com | support.dell.com
Example
(E-Series)
FTOS#show memory
Statistics On CP Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
452689184 64837834 387851350 387805590 371426976
Statistics On RP1 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
629145600 4079544 625066056 625066056 0
Statistics On RP2 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
510209568 47294716 462914852 462617968 446275376
FTOS#
Table 4-3 defines the fields displayed in the example.
show memory (S-Series)
s
View current memory usage on the S-Series switch.
Syntax
show memory [stack-unit 0-7]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for show memory displays the memory usage of LP part (sysdlp) of the
system. The Sysdlp is an aggregate task that handles all the tasks running on the
S-Series’ CPU.
Example
FTOS#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
Table 4-3. Descriptions for show memory output
Field Description
Lowest Displays the memory usage the system went to in the lifetime of the system.
Indirectly, it indicates the maximum usage in the lifetime of the system: Total minus
Lowest.
Largest The current largest available. This relates to block size and is not related to the
amount of memory on the system.
stack-unit 0-7 (OPTIONAL) Enter the keyword stack-unit followed by the stack unit ID of
the S-Series stack member to display memory information on the designated
stack member.
Version 7.6.1.0 Introduced this version of the command for the S-Series