Reference Guide

1180 | Port Monitoring
www.dell.com | support.dell.com
Related
Commands
show config
c e s
Display the current monitor session configuration.
Syntax show config
Defaults
No default values or behavior
Command Modes
MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
Example
FTOS(conf-mon-sess-11)#show config
!
monitor session 11
source GigabitEthernet 10/0 destination GigabitEthernet 10/47 direction rx
FTOS#
show monitor session
c e s
Display the monitor information of a particular session or all sessions.
Syntax show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session
command.
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
show monitor session Display the monitor session
show running-config monitor session Display the running configuration of a monitor session
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
session-ID
(OPTIONAL) Enter a session identification number.
Range: 0 to 65535
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series