Reference Guide

1190 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
Example
(show vlan
private-vlan
interface)
FTOS# show vlan private-vlan interface Gi 2/1
Primary Secondary Type Active Ports
------- --------- --------- ------ ------------------------
10 primary Yes Gi 2/1
If the VLAN ID is that of a primary VLAN, then the entire private VLAN output will
be displayed, as shown in the first figure below. If the VLAN ID is a secondary
VLAN, only its primary VLAN and its particular secondary VLAN properties will be
displayed, as shown in the second figure below.
Example
(primary)
FTOS# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- ------ ------------------------
10 primary Yes Gi 2/1,3
1020 isolated Yes Gi 0/4
101 community Yes Gi 2/7-10
Example
(secondary)
FTOS#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- ------ ------------------------------------------
10 Primary Yes Po 1
Gi 0/2
102 Isolated Yeso Gi 0/4
The table, below, defines the fields in the output, above.
Related
Commands
show vlan private-vlan mapping
c s
Display primary-secondary VLAN mapping.
Table 40-2. show interfaces description Command Example Fields
Field Description
Primary Displays the VLAN ID of the designated or associated primary VLAN(s)
Secondary Displays the VLAN ID of the designated or associated secondary VLAN(s
Type Displays the type of VLAN in which the listed interfaces reside
Active States whether the interface is operationally up or down
Ports Displays the interface IDs in the listed VLAN.
private-vlan mode Set the mode of the selected VLAN to either community or isolated.
show interfaces private-vlan Display type and status of PVLAN interfaces.
show vlan private-vlan
mapping
Display primary-secondary VLAN mapping.
switchport mode
private-vlan
Set the PVLAN mode of the selected port.