Reference Guide

Private VLAN (PVLAN) | 1191
Syntax
show vlan private-vlan mapping
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output of this command, shown below, displays the community and isolated
VLAN IDs that are associated with each primary VLAN.
FTOS# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 102
Community : 101
Unknown : 200
Related
Commands
switchport mode private-vlan
c s
Set the PVLAN mode of the selected port.
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove the PVLAN mode from the selected port, use the
no switchport mode
private-vlan
command.
Parameters
Defaults
disabled
Command Modes
INTERFACE
Version 7.8.1.0 Introduced on C-Series and S-Series
private-vlan mode Set the mode of the selected VLAN to either community or isolated.
show interfaces private-vlan Display type and status of PVLAN interfaces.
show vlan private-vlan
mapping
Display primary-secondary VLAN mapping.
switchport mode
private-vlan
Set the PVLAN mode of the selected port.
host
Enter host to configure the selected port or port channel as an isolated
interface in a PVLAN, as described above.
promiscuous
Enter promiscuous to configure the selected port or port channel as an
promiscuous interface, as described above.
trunk
Enter trunk to configure the selected port or port channel as a trunk port in a
PVLAN, as described above.