Reference Guide

Quality of Service (QoS) | 1227
Usage
Information
You must enter the class-map command in order to access this command. Once the class map
is identified, you can configure the match criteria.
Related
Commands
match mac dot1p
c e s
Configure a match criterion for a class map, based on a dot1p value.
Syntax
match mac dot1p {dot1p-list}
Parameters
Defaults
No default values or behavior
Command Modes
class-map
Command
History
Usage
Information
You must enter the class-map command in order to access this command. Once the class map
is identified, you can configure the match criteria.
Related
Commands
match mac vlan
c e s
Configure a match criterion for a class map based on VLAN ID.
Syntax
match mac vlan number
Parameters
Defaults
None
class-map Identify the class map.
dot1p-list
Enter a dot1p value.
Range: 0 to 7
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for DSCP Marking option
Version 7.4.1.0 Introduced
class-map Identify the class map.
number
Enter the VLAN ID.
Range: 1 to 4094