Reference Guide

Quality of Service (QoS) | 1253
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
WRED1 2000 7000
test cam-usage
c e s
Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map linecard {[number port-set portpipe number] | [all]}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
Example
FTOS# test cam-usage service-policy input pmap_l2 linecard all
For a L2 Input Policy Map pmap_l2, the output must be as follows,
Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM | Status
| | | | per Port | (Allowed ports)
0 0 L2ACL 500 200 Allowed (2)
0 1 L2ACL 100 200 Exception
1 0 L2ACL 1000 200 Allowed (5)
1 1 L2ACL 0 200 Exception
…
…
…
13 1 L2ACL 400 200 Allowed (2)
FTOS#
policy-map
Enter the policy map name.
linecard number
(OPTIONAL) Enter the keyword linecard followed by the line
card slot number.
port-set portpipe number
Enter the keyword port-set followed by the line card’s port pipe
number.
Range: 0 or 1
linecard all (OPTIONAL) Enter the keywords linecard all to indicate all line
cards.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series