Reference Guide

126 | Control and Monitoring
www.dell.com | support.dell.com
* In the S-Series, this command supports only the cp keyword, not the rp1, rp2, and lp
options.
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
(C-Series)
FTOS# show processes ipc flow-control cp
Q Statistics on CP Processor
TxProcess RxProcess Cur High Time Retr Msg Ack Aval Max
Len Mark Out ies Sent Rcvd Retra Retra
ACL0 RTM0 0 0 0 0 0 0 10 10
ACL0 DIFFSERV0 0 0 0 0 0 0 10 10
ACL0 IGMP0 0 0 0 0 0 0 10 10
ACL0 PIM0 0 0 0 0 0 0 10 10
ACL0 ACL20 0 1 0 0 2 2 50 50
CFG0 CFGDATASYNC0 0 2 0 0 7 7 255 255
DHCP0 ACL0 0 1 0 0 9 9 25 25
DHCP0 IFMGR0 0 0 0 0 0 0 25 25
RTM0 ARPMGR0 0 1 0 0 1 1 136 136
ACL20 IGMP0 0 0 0 0 0 0 50 50
LACP0 IFMGR0 0 2 0 0 4 4 25 25
ARPMGR0 MRTM0 0 0 0 0 0 0 100 100
ACL20 PIM0 0 0 0 0 0 0 50 50
MACMGR0 ACL0 0 1 0 0 1 1 25 25
TCLASSMGR0 ARPMGR0 0 0 0 0 0 0 100 100
IFMGR0 IPMGR2 0 6 0 0 44 44 8 8
!--------------------------output truncated ---------------------------------!
Example
(E-Series)
FTOS# show processes ipc flow-control cp
Q Statistics on CP Processor
TxProcess RxProcess Cur High Time Retr Msg Ack Aval Max
Len Mark Out ies Sent Rcvd Retra Retra
DHCP0 ACL0 0 1 0 0 6 6 25 25
DHCP0 IFMGR0 0 0 0 0 0 0 25 25
IFMGR0 FEFD0 0 3 0 0 27 27 8 8
IFMGR0 IPMGR0 0 6 0 0 44 44 8 8
IFMGR0 SNMP0 0 1 0 0 16 16 8 8
IFMGR0 SFL_CP0 0 4 0 0 31 31 8 8
IFMGR0 EVENTTERMLOG0 0 1 0 0 6 6 8 8
IFMGR0 PORTMIRR0 0 0 0 0 0 0 8 8
IFMGR0 DHCP0 0 1 0 0 6 6 8 8
IFMGR0 TCLASSMGR0 0 2 0 0 13 13 8 8
rp2
(OPTIONAL) Enter the keyword rp2 to view the Control Processor’s SWPQ
statistics on Route Processor 2.*
lp linecard-number (OPTIONAL) Enter the keyword lp followed by the line card number to
view the Control Processor’s SWPQ statistics on the specified line card.*
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series and E-Series