Reference Guide

Quality of Service (QoS) | 1263
Related
Commands
show queue statistics ingress
e
Display the ingress queue statistics.
Syntax
show queue statistics ingress [unicast [src-card ID [dst-card ID]] | [multicast] [src-card ID]] [brief]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
EtherScale systems display cumulative dropped packets, while TeraScale systems display
cumulative queued bytes (in KB), cumulative queued packets (in KB), and cumulative
dropped packets (in KB).
Table 42-13. show queue statistics egress brief Command Fields
Field Description
LC Line Card
Portpipe Portpipe number
Port Port Queue. Where M is Multicast queue
Dropped Pkts The number of packets dropped for green, yellow and
out-of-profile
clear queue statistics egress Clear egress queue statistics.
clear queue statistics ingress Clear ingress queue statistics.
show queue statistics ingress Display ingress queue statistics
unicast [src-card ID
[dst-card ID]]
(OPTIONAL) Enter the keyword unicast to display Unicast queue
statistics. Optionally, enter the source card identification (
src-card
ID) and the destination card identification (dst-card ID) to display
the unicast statistics from the source card to the destination card.
Destination card Identification: Range 0 to 13 or RPM
multicast [src-card ID]
(OPTIONAL) Enter the keyword multicast to display only
Multicast queue statistics. Optionally, enter the source card
identification (
src-card ID) to display the multicast statistics from
the source card. Default: Both Unicast and Multicast queue
statistics are displayed.
brief
(OPTIONAL) Enter the keyword brief to display only ingress per
link buffering and egress per port buffering statistics.
Version 6.2.1.1 Introduced