Reference Guide

Routing Information Protocol (RIP) | 1273
Syntax
default-metric number
To return the default metric to the original values, enter no default-metric.
Parameters
Default
1
Command Modes
ROUTER RIP
Command
History
Usage
Information
This command ensures that route information being redistributed is converted to the
same metric value.
Related
Commands
description
c e s
Enter a description of the RIP routing protocol
Syntax
description {description}
To remove the description, use the
no description {description} command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTER RIP
Command
History
number
Specify a number.
Range: 1 to 16.
The default is 1.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
redistribute Allows you to redistribute routes learned by other methods.
description
Enter a description to identify the RIP protocol (80 characters maximum).
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-7.7.1.0 Introduced on E-Series