Reference Guide

Routing Information Protocol (RIP) | 1277
Defaults
Disabled.
Command Modes
INTERFACE
Command
History
Related
Commands
ip rip receive version
c e s
Set the interface to receive specific versions of RIP. The RIP version you set on the
interface overrides the version command in the ROUTER RIP mode.
Syntax
ip rip receive version [1] [2]
To return to the default, enter
no ip rip receive version.
Parameters
Defaults
RIPv1 and RIPv2
Command Modes
INTERFACE
Command
History
Usage
Information
If you want the interface to receive both versions of RIP, enter ip rip receive version 1
2
.
Related
Commands
ip rip send version
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip split-horizon Set RIP routing updates to exclude routing prefixes.
1
(OPTIONAL) Enter the number 1 for RIP version 1.
2
(OPTIONAL) Enter the number 2 for RIP version 2.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip rip send version Sets the RIP version to be used for sending RIP traffic on an interface.
version Sets the RIP version to be used for the switch software.