Reference Guide

128 | Control and Monitoring
www.dell.com | support.dell.com
ACL0 DIFFSERV0 0 0 0 0 0 0 10 10
ACL0 IGMP0 0 0 0 0 0 0 10 10
ACL0 PIM0 0 0 0 0 0 0 10 10
LACP0 IFMGR0 0 0 0 0 0 0 25 25
RTM0 ARPMGR0 0 0 0 0 0 0 136 136
MACMGR0 ACL0 0 0 0 0 0 0 25 25
ARPMGR0 MRTM0 0 0 0 0 0 0 100 100
DHCP0 ACL0 0 1 0 0 1 1 25 25
DHCP0 IFMGR0 0 0 0 0 0 0 25 25
L2PM0 SPANMGR0 0 2 0 0 14 14 25 25
ARPMGR0 FIBAGT0 0 1 0 0 1 1 100 100
SPANMGR0 MACMGR0 0 0 0 0 0 0 25 25
SPANMGR0 IPMGR0 0 0 0 0 0 0 25 25
SPANMGR0 L2PM0 0 0 0 0 0 0 25 25
STP0 L2PM0 0 0 0 0 0 0 25 25
RTM0 FIBAGT0 0 2 0 0 4 4 255 255
L2PM0 STP0 0 5 0 0 5 5 25 25
ACL_AGENT0 PIM0 0 0 0 0 0 0 20 20
ACL_AGENT0 PIM0 0 0 0 0 0 0 20 20
FRRP0 L2PM0 0 0 0 0 0 0 25 25
L2PM0 FRRP0 0 1 0 0 13 13 25 25
ACL0 ACL_AGENT0 0 4 0 0 7 7 90 90
ACL0 MACAGENT0 0 0 0 0 0 0 90 90
IFMGR0 EVENTTERMLOG0 0 1 0 0 1 1 8 8
IFMGR0 SNMP0 0 1 0 0 1 1 8 8
IFMGR0 IPMGR0 0 7 0 0 9 9 8 8
IFMGR0 DIFFSERV0 0 2 0 0 3 3 8 8
DIFFSERV0 ACL_AGENT0 0 0 0 0 0 0 100 100
!---------------output truncated --------------------------!
Usage
Information
The Single Window Protocol (SWP) provides flow control-based reliable
communication between the sending and receiving software tasks.
Important Points to Remember
• A sending task enqueues messages into the SWP queue3 for a receiving task and
waits for an acknowledgement.
• If no response is received within a defined period of time, the SWP timeout
mechanism resubmits the message at the head of the FIFO queue.
• After retrying a defined number of times, the following timeout message is
generated:
SWP-2-NOMORETIMEOUT
• In the display output in the example above, a retry (Retries) value of zero
indicates that the SWP mechanism reached the maximum number of
retransmissions without an acknowledgement.
show processes memory (C-Series and E-Series)
c e
View memory usage information based on processes running in the system.
Syntax
show processes memory [cp | lp slot-number {lp all | lp summary} | rp1 | rp2]