Reference Guide

1284 | Routing Information Protocol (RIP)
www.dell.com | support.dell.com
Parameters
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Related
Commands
redistribute isis
e
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value] [route-map
map-name]
To disable redistribution, use the
no redistribute isis [tag] [level-1 | level-1-2 | level-2]
[
metric metric-value] [route-map map-name] command.
Parameters
connected
Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
static
Enter the keyword static to specify that information from static routes is
redistributed.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
default-information
originate
Generate a default route for RIP traffic.
tag
(OPTIONAL) Enter the name of the IS-IS routing process.
level-1
(OPTIONAL) Enter the keyword level-1 to redistribute only IS-IS
Level-1 routes.
level-1-2
(OPTIONAL) Enter the keyword level-1-2 to redistribute both IS-IS
Level-1 and Level-2 routes.
level-2
(OPTIONAL) Enter the keyword level-2 to redistribute only IS-IS
Level-2 routes.
metric metric-value (OPTIONAL) Enter the keyword metric followed by a number as the
metric value.
Range: 0 to16
route-map map-name (OPTIONAL) Enter the keyword route-map followed by the name of a
configured route map.