Reference Guide

Routing Information Protocol (RIP) | 1285
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
Usage
Information
IS-IS is not supported on S-Series systems.
redistribute ospf
c e s
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value]
[
route-map map-name]
To disable redistribution, enter no
redistribute ospf process-id [match external {1 | 2} |
match internal | metric metric-value] [route-map map-name] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
pre-Version 6.2.1.1 Introduced on E-Series
process-id
Enter a number that corresponds to the OSPF process ID to be
redistributed.
Range: 1 to 65355.
match external {1 |
2
}
(OPTIONAL) Enter the keywords
match external followed by the
numbers 1 or 2 to indicated that external 1 routes or external 2 routes
should be redistributed.
match internal
(OPTIONAL) Enter the keywords match internal to indicate that internal
routes should be redistributed.
metric metric-value (OPTIONAL) Enter the keyword metric followed by a number as the
metric value.
Range: 0 to 16
route-map
map-name
(OPTIONAL) Enter the keyword route-map followed by the name of a
configured route map.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series