Reference Guide

Control and Monitoring | 129
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for show process memory displays the memory usage statistics running
on CP part (sysd) of the system. The Sysd is an aggregate task that handles all the
tasks running on C-Series’ and E-Series' CP.
In FTOS Release 7.4.1.0 and higher, the total counter size (for all 3 CPUs) in
show
memory
and show processes memory will differ based on which FTOS processes are
counted.
•In the show memory (C-Series and E-Series) display output, the memory size is
equal to the size of the application processes.
•In the show processes memory (C-Series and E-Series) display output, the
memory size is equal to the size of the application processes plus the size of the
system processes.
Example
FTOS#show processes memory
Memory Statistics On CP Processor (bytes)
==========================================
Total: 452689184, MaxUsed: 64886986, CurrentUsed: 64873866, Current
TaskName TotalAllocated TotalFreed MaxHeld CurrentHolding
tRootTask 39083408 1395840 38143920 37687568
cp
(OPTIONAL) Enter the keyword cp to view memory usage of the Control
Processor.
lp slot-number (OPTIONAL) Enter the keyword lp and the slot number to view information
on the line-card processor in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to
5 on a E300.
lp all (OPTIONAL) Enter the keyword lp all to view CP memory usage on all
active line cards.
lp summary (OPTIONAL) Enter the keyword
lp summary to view a summary of the line
card CP memory usage.
rp1
(OPTIONAL) Enter the keyword rp1 to view memory usage of the Route
Processor 1.
Note: This option is supported on the E-Series only.
rp2
(OPTIONAL) Enter the keyword rp2 to view memory usage of the Route
Processor 2.
Note: This option is supported on the E-Series only.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Added lp all and lp summary options
Version 6.5.1.0 For
rp1 and rp2 only, the output displays memory consumption of all the
processes including a summary, as shown in the second and third examples.