Reference Guide

Remote Monitoring (RMON) | 1295
rmon event
c e s z
Add an event in the RMON event table.
Syntax
rmon event number [log] [trap community] [description string] [owner name]
To disable RMON on an interface, use the
no rmon event number [log] [trap
community] [description string] command.
Parameters
Defaults
as described above
Command Modes
CONFIGURATION
Command
History
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series
number
Assign an event number in integer format from 1 to 65535. The
number value must be unique in the RMON Event Table.
log
(OPTIONAL) Enter the keyword log to generate an RMON log
entry. The log entry is triggered and sets the eventType in the RMON
MIB to log or log-and-trap.
Default: No log
trap community
(OPTIONAL) Enter the keyword trap followed by an SNMP
community string to configure the eventType setting in the RMON
MIB. This sets either snmp-trap or log-and-trap.
Default: public
description string
(OPTIONAL) Enter the keyword description followed by a string
describing the event.
owner name
(OPTIONAL) Enter the keyword owner followed by the name of the
owner of this event.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series