Reference Guide

1306 | Rapid Spanning Tree Protocol (RSTP)
www.dell.com | support.dell.com
bridge-priority
c e s
Set the bridge priority for RSTP.
Syntax
bridge-priority priority-value
To return to the default value, enter no bridge-priority.
Parameters
Defaults
32768
Command Modes
CONFIGURATION RSTP (conf-rstp)
Command
History
Related
Commands
debug spanning-tree rstp
c e s
Enable debugging of RSTP and view information on the protocol.
Syntax
debug spanning-tree rstp [all | bpdu interface {in | out} | events]
To disable debugging, enter
no debug spanning-tree rstp.
priority-value
Enter a number as the bridge priority value in increments of 4096.
Range: 0 to 61440
Default: 32768
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.2.1.1 Introduced for E-Series
protocol spanning-tree rstp Enter the Rapid Spanning Tree mode