Reference Guide

Security | 1325
Command
History
Usage
Information
Use the enable password command to define a password for the level to which you
are assigning privilege or access.
privilege level (LINE mode)
c e s
Change the access level for users on the terminal lines.
Syntax
privilege level
level
To delete access to a terminal line, use the no privilege level level command.
Parameters
Defaults
level = 15
Command Modes
LINE
Command
History
Authentication and Password Commands
This section contains the following commands controlling management access to the
system:
• aaa authentication enable
• aaa authentication login
• access-class
• enable password
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
level level Enter the keyword level followed by a number for the access level.
Range: 0 to 15.
Level 1 is the EXEC mode and Level 15 allows access to all CLI modes.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series