Reference Guide

Security | 1331
Syntax
enable restricted
[encryption-type] password
To disallow access to restricted commands, enter no enable restricted.
Parameters
Command Modes
Not configured.
Command
History
Usage
Information
Only Dell Force10 Technical Support staff use this command.
enable secret
c e s
Change the password for the enable command.
Syntax
enable secret
[level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password [level level]
command.
Parameters
Defaults
No password is configured. level = 15
encryption-type
(OPTIONAL) Enter the number 7 as the encryption type.
Enter
7 followed a text string as the hidden password. The text string must be
a password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the
show
running-config
file of another Dell Force10 router.
password
Enter a text string, up to 32 characters long, as the clear text password.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
level level (OPTIONAL) Enter the keyword level followed by a number as the
level of access.
Range: 1 to 15
encryption-type
(OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a
5 followed by a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell Force10
router.
Use this parameter only with a password that you copied from the
show
running-config
file of another Dell Force10 router.
password
Enter a text string, up to 32 characters long, as the clear text password.