Reference Guide

1334 | Security
www.dell.com | support.dell.com
Related
Commands
password-attributes
c e s
Configure the password attributes (strong password).
Syntax
password-attributes
[min-length number] [max-retry number] [character-restriction [upper
number] [lower number] [numeric number] [special-char number]]
To return to the default, use the
no password-attributes [min-length number] [max-retry
number] [character-restriction [upper number] [lower number] [numeric number]
[
special-char number]] command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION
enable password Set the password for the enable command.
login authentication Configure an authentication method to log in to the switch.
service
password-encryption
Encrypt all passwords configured in FTOS.
radius-server key Configure a key for all RADIUS communications between the switch and
the RADIUS host server.
tacacs-server key Configure a key for communication between a TACACS+ server and
client.
username Establish an authentication system based on user names.
min-length number
(OPTIONAL) Enter the keyword min-length followed by the number
of characters.
Range: 0 - 32 characters
max-retry number
(OPTIONAL) Enter the keyword max-retry followed by the number
of maximum password retries.
Range: 0 - 16
character-restriction
(OPTIONAL) Enter the keyword character-restriction to indicate a
character restriction for the password.
upper number
(OPTIONAL) Enter the keyword upper followed the upper number.
Range: 0 - 31
lower number
(OPTIONAL) Enter the keyword lower followed the lower number.
Range: 0 - 31
numeric number
(OPTIONAL) Enter the keyword numeric followed the numeric
number.
Range: 0 - 31
special-char number
(OPTIONAL) Enter the keyword special-char followed the number
of special characters permitted.
Range: 0 - 31