Reference Guide

Security | 1337
Example
FTOS#show user
Line User Host(s) Location
0 console 0 admin idle
* 3 vty 1 admin idle 172.31.1.4
FTOS#
Table 1 describes the information in the show users command example.
Related
Commands
timeout login response
c e s
Specify how long the software will wait for login input (for example, user name and
password) before timing out.
Syntax
timeout
login response seconds
To return to the default values, enter no timeout login response.
Parameters
Defaults
above
Command Modes
LINE
Command
History
Table 1 show users Command Example Fields
Field Description
(untitled) Indicates with am asterisk (*) which terminal
line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
username Enable a user.
seconds
Enter a number of seconds the software will wait before logging you out.
Range:
VTY: 1 to 30 seconds, default: 30 seconds.
Console: 1 to 300 seconds, default: 0 seconds (no timeout).
AUX: 1 to 300 seconds, default: 0 seconds (no timeout).
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series