Reference Guide

Security | 1355
dot1x port-control
c e s
Enable port control on an interface.
Syntax
dot1x port-control
{force-authorized | auto | force-unauthorized}
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE
Command
History
Usage
Information
The authenticator performs authentication only when port-control is set to auto.
dot1x quiet-period
c e s
Set the number of seconds that the authenticator remains quiet after a failed
authentication with a client.
Syntax dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
force-authorized
Enter the keyword force-authorized to forcibly authorize a port.
auto
Enter the keyword auto to authorize a port based on the 802.1X
operation result.
force-unauthorized
Enter the keyword force-unauthorized to forcibly de-authorize a port.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds
Enter the number of seconds.
Range: 1 to 65535
Default: 30
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810