Reference Guide

Security | 1357
Command Modes
INTERFACE
Command
History
dot1x server-timeout
c e s
Configure the amount of time after which exchanges with the server time out.
Syntax dot1x server-timeout seconds
To return to the default, use the no dot1x server-timeout command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
dot1x supplicant-timeout
c e s
Configure the amount of time after which exchanges with the supplicant time out.
Syntax dot1x supplicant-timeout seconds
To return to the default, use the no dot1x supplicant-timeout command.
Parameters
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds
Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds
Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30