Reference Guide

1364 | Security
www.dell.com | support.dell.com
Parameters
Defaults
10 per minute
Command Modes
CONFIGURATION
Command
History
ip ssh hostbased-authentication
c e s
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the
no ip ssh
hostbased-authentication enable
command.
Parameters
Defaults
Disable by default
Command Modes
CONFIGURATION
Command
History
Usage
Information
If this command is enabled, clients can login without a password prompt. This
provides two levels of authentication:
• rhost-authentication is done with the file specified in the
ip ssh rhostfile command
• checking client host-keys is done with the file specified in the
ip ssh pub-key-file
command
1-10
Enter the number of maximum number of incoming SSH connections
allowed per minute.
Range: 1 to 10 per minute
Default: 10 per minute
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
enable
Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series