Reference Guide

1384 | Security
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
TRACE LIST
Command
History
Related
Commands
show config
e
View the current IP trace list configuration.
Syntax show config
Command Modes
TRACE LIST
Example
FTOS(config-trace-acl)#show config
!
ip trace-list suzanne
seq 5 deny tcp any any
FTOS(config-trace-acl)#
port port (OPTIONAL) Enter the application layer port number. Enter two
port numbers if using the
range logical operand.
Range: 0 to 65535
The following list includes some common TCP port numbers:
•23 = Telnet
• 20 and 21 = FTP
•25 = SMTP
• 169 = SNMP
destination
Enter the IP address of the network or host to which the packets
are sent.
precedence precedence Enter the keyword precedence followed by a number from 0 to 7
as the precedence value.
tos tos-value Enter the keyword tos followed by a number from 0 to 15 as the
TOS value.
count
(OPTIONAL) Enter the keyword count to count packets
processed by the filter.
byte
(OPTIONAL) Enter the keyword byte to count only bytes
processed by the filter.
log
(OPTIONAL) Enter the keyword log to have the information kept
in a Trace-list log file.
Version 7.4.1.0 Deprecated established keyword — not supported on TeraScale
line cards.
deny Configure a filter to drop packets.
permit Configure a filter to forward packets.