Reference Guide

Security | 1385
show ip accounting trace-lists
e
View the trace lists created on the switch and the sequence of filters.
Syntax
show ip accounting trace-lists
[trace-list-name [linecard number]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip accounting trace-list suzanne
Trace List suzanne
seq 5 deny ip any any count (0x00 packets)
seq 10 permit tcp 10.1.1.0 /24 any count bytes (0x00 bytes)
FTOS#
Secure DHCP Commands
DHCP as defined by RFC 2131 provides no authentication or security mechanisms.
Secure DHCP is a suite of features that protects networks that use dynamic address
allocation from spoofing and attacks.
• clear ip dhcp snooping
• ip dhcp relay
• ip dhcp snooping
• ip dhcp snooping database
• ip dhcp snooping binding
• ip dhcp snooping database renew
• ip dhcp snooping trust
• ip dhcp source-address-validation
• ip dhcp snooping vlan
• show ip dhcp snooping
trace-list-name
(OPTIONAL) Enter the name of the trace list to be displayed.
linecard number (OPTIONAL) Enter the keyword linecard followed by the line card number
to view the Trace list information on that line card.
C-Series and S-Series Range: 0 to 7 on the C300
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series