Reference Guide

1388 | Security
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Default
None
Command
History
Related
Commands
ip dhcp snooping database renew
c s
Renew the binding table.
Syntax ip dhcp snooping database renew
Command Modes
EXEC
EXEC Privilege
Default
None
Command
History
interface
type Enter the keyword interface followed by the type of interface to which the
host is connected.
• For an 10/100 Ethernet interface, enter the keyword
fastethernet.
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet.
• For a SONET interface, enter the keyword
sonet.
• For a Ten Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease followed by the amount of time the IP address will
be leased.
Range: 1-4294967295
Version 8.3.19.0 Introduced on S4820T
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on C-Series and S-Series
show ip dhcp snooping Display the contents of the DHCP binding table.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on C-Series and S-Series