Reference Guide

1396 | Service Provider Bridging
www.dell.com | support.dell.com
show protocol-tunnel
c e s
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
Example
FTOS#show protocol-tunnel
System Rate-Limit: 75 frames/second
VLAN Protocols Interface
1000 STP,PVST Gi 5/7,Gi 5/6
1001 LLDP,GVRP Gi 5/7,Gi 5/6
1002 MMRP,MVRP Gi 5/7,Gi 5/6
1003 LACP,DOT1X Gi 5/7,Gi 5/6
1004 OAM,PAUSE Gi 5/7,Gi 5/6
1005 E-LMI Gi 5/7,Gi 5/6
Example
(specific VLAN)
FTOS#show protocol-tunnel vlan 2
System Rate-Limit: 1000 Frames/second
Interface Vlan Protocol(s)
Gi1/2 2 STP, PVST
FTOS#
Related
Commands
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
information for the one VLAN.
Range: 1 to 4094
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on the C-Series, E-Series and E-Series ExaScale.
Version 7.4.1.0 Introduced
show running-config Display the current configuration.