Reference Guide

1398 |sFlow
www.dell.com | support.dell.com
• The destination VLAN field in the extended switch element will not be packed in
case of a multicast packet.
• The maximum number of packets that can be sampled and processed per second
is:
• 7500 packets when no extended information packing is enabled
• 7500 packets when only extended-switch information packing is enabled (
sflow extended-switch enable)
• 1600 packets when extended-router and/or extended-gateway information
packing is enabled ( Figure and sflow extended-gateway enable)
Commands
The sFlow commands are:
• sflow collector
• sflow enable (Global)
• sflow enable (Interface)
• sflow extended-gateway enable
• sflow extended-router enable
• sflow extended-switch enable
• sflow polling-interval (Global)
• sflow polling-interval (Interface)
• sflow sample-rate (Global)
• sflow sample-rate (Interface)
• show sflow
• show sflow linecard
sflow collector
c e s
Configure a collector device to which sFlow datagrams are forwarded.
Syntax
sflow collector {ipv4-address | ipv6-address} agent-addr {ipv4-address | ipv6-address}
[number [max-datagram-size number]] | [max-datagram-size number]
Parameters
sflow collector ipv4-address |
ipv6-address
Enter the IPv4 (A.B.C.D) or IPv6 address (X:X:X:X::X) of
the sFlow collector device.
agent-addr ipv4-address |
ipv6-address
Enter the IPv4 (A.B.C.D) or IPv6 address (X:X:X:X::X) of
the sFlow agent in the router.