Reference Guide

1414 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
Syntax
snmp-serve
r community community-name {ro | rw} [ipv6 ipv6-access-list-name [ipv6
ipv6-access-list-name | access-list-name | security-name name] | security-name name
[
ipv6 ipv6-access-list-name | access-list-name | security-name name] | access-list-name
[ipv6 ipv6-access-list-name | access-list-name | security-name name]]]
To remove access to a community, use the
no snmp-server community community-string
{
ro | rw} [security-name name [access-list-name | ipv6 access-list-name | access-list-name
ipv6
access-list-name]] command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Usage
Information
The example below configures a community named public that is mapped to the
security named
guestuser with Read Only (ro) permissions.
Example
FTOS#config
FTOS(conf)# snmp-server community public ro
FTOS(conf)# snmp-server community guest ro security-name guestuser
FTOS(conf)#
The security-name parameter maps the community string to an SNMPv3 user/
security name as defined by the community MIB.
If a community string is configured without a
security-name (for example,
snmp-server community public ro), the community is mapped to a default
security-name/group:
• v1v2creadu / v1v2creadg — maps to a community with
ro (read-only)
permissions
community-name
Enter a text string (up to 20 characters long) to act as a password for
SNMP.
ro
Enter the keyword ro to specify read-only permission.
rw
Enter the keyword rw to specify read-write permission.
ipv6 access-list-name
(Optional) Enter the keyword ipv6 followed by a an IPv6 ACL
name (a string up to 16 characters long).
security-name name
(Optional) Enter the keyword security-name followed by the
security name as defined by the community MIB.
access-list-name
(Optional) Enter a standard IPv4 access list name (a string up to 16
characters long).
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.2.1.1 Introduced on E-Series