Reference Guide

Simple Network Management Protocol and Syslog | 1423
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
snmp-server packetsize
c e s z
Set the largest SNMP packet size permitted when the SNMP server is receiving a
request or generating a reply, use the
snmp-server packetsize global configuration
command.
Syntax
snmp-server packetsize
byte-count
Parameters
Defaults
8
Command Modes
CONFIGURATION
Command
History
snmp-server trap-source
c e s z
Configure a specific interface as the source for SNMP traffic.
Syntax
snmp-server trap-source
interface
To disable sending traps out a specific interface, enter no snmp trap-source.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
byte-count
Enter one of the following values 8, 16, 24 or 32. Packet sizes are 8000 bytes,
16000 bytes, 32000 bytes, and 64000 bytes.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command